{"id":2188,"date":"2026-10-07T15:23:11","date_gmt":"2026-10-07T12:23:11","guid":{"rendered":"https:\/\/sites.uef.fi\/openar\/?page_id=2188"},"modified":"2026-10-09T09:52:11","modified_gmt":"2026-10-09T06:52:11","slug":"openar-g","status":"publish","type":"page","link":"https:\/\/sites.uef.fi\/openar\/openar-g\/","title":{"rendered":"OpenAR-G"},"content":{"rendered":"\n
\"\"
Model G of the OpenAR family recognizes hand gestures and communicates with other headsets.<\/em><\/figcaption><\/figure>\n\n\n\n

OpenAR-G (G for Gesture) extends the OpenAR platform with gesture recognition and wireless communication. By combining a compact AR device with an infrared gesture sensor, OpenAR-G lets you communicate through hand gestures.<\/p>\n\n\n\n

OpenAR-G is a sister device to OpenAR-M<\/strong><\/a>, utilizing mostly the same design and components. The main change to the hardware is the incorporation of a gesture sensor and the ESP32C3 development board. When you perform a hand gesture, the sensor detects it and sends it to the microcontroller. This information is then transmitted wirelessly to another OpenAR-G headset, where it can be displayed or used to trigger an action. Each device identifies the other via MAC address, allowing bidirectional exchange of gestures.<\/p>\n\n\n\n

\"\"
The demonstration software in action. The user, walking outdoors, is not sending (S) a signal but receives (R) a gesture from another OpenAR device.<\/em><\/figcaption><\/figure>\n\n\n\n

Contactless interfaces<\/h2>\n\n\n\n

The gesture sensor opens up many possibilities beyond the demonstration software. Instead of using buttons, simple hand gestures could be used to navigate menus and control applications. For example, showing one, two or three fingers could select different menu options, while a swipe gesture could move to the previous screen.<\/p>\n\n\n\n

This is just one example of what can be built with OpenAR-G. The next application is yours to invent.<\/p>\n\n\n\n

Optical design<\/h2>\n\n\n\n

OpenAR-G uses a monocular optical system to reduce the number of components and the overall weight of the glasses. The image is only projected into a single eye while the other eye remains unobstructed.<\/p>\n\n\n\n

\"\"
The OLED display emits light towards a mirror that reflects it by 90\u00b0. The reflected light is collimated by the lens, and these collimated rays are reflected again towards the user\u2019s eye with a small piece of glass.<\/em><\/figcaption><\/figure>\n\n\n\n

How to make it<\/h2>\n\n\n\n

To build the OpenAR-G glasses, we used the components listed below. Note\u2014they are only examples; many of them can easily be replaced. The following links will take you to retailers where you can purchase the parts, check their technical details, and look for similar products. Prices vary depending on the supplier; however, OpenAR-G can typically be built for approximately 85 \u20ac.<\/p>\n\n\n\n

Display<\/strong>: 128\u00d764 OLED display<\/a> (16 \u20ac)
Glass<\/strong>: Cut from a plate of thin flint glass (2 \u20ac)
Lens<\/strong>: 50 mm focal length lens<\/a> (26 \u20ac)
Mirror<\/strong>: Cut from a rectangular makeup mirror<\/a>. We removed the reflective coating from the back of the mirror to create a first surface mirror, but true first surface mirrors are also available for purchase. (2 \u20ac)
Development board<\/strong>: XIAO Seeed Studio ESP32C3<\/a> (5.50 \u20ac)
Battery<\/strong>: Rechargeable 3.7 V 500 mAh LiPo battery<\/a> (5 \u20ac)
Gesture sensor<\/strong>: Grove Smart IR Gesture Sensor (PAJ7660)<\/a> (25 \u20ac)
Accessories<\/strong>: For example, M2 bolts x 23 (10 mm), M2 nuts x 5, thin electrical wire etc. Complete list of items and tools are provided in the documentation. (~5 \u20ac)<\/p>\n\n\n\n

The frame of the glasses can be 3D-printed using regular PLA filament. The 3D-printed components may require modifications to ensure a comfortable fit or to accommodate the specific optics and electronics you are using.<\/p>\n\n\n\n

Watch the video below to see how the headset comes together!<\/p>\n\n\n\n\t

\n\t\t\t\t\t